Modem Upgrade to V.90
HM18020-4 ONLY
Please follow the steps below to upgrade your modem (HM18020-4) to V.90:
Important Notes.
You must do the following update:
1.) Update Driver V2.0
2.) Update Firmware using Flash Utility1.) Update Driver V2.0
You have to remove the old driver and install the new driver again for best performace connection. Otherwise, V.90 result code can't be recognized by TAPI(Telephony Application Programming Interface). TAPI determines the features on your modem.
To delete the old drivers and reinstall the modem.
- Click on the start button, go to settings, choose Control Panel. Then double click the modem icon. Highlight the modem HM18020-4. Then click remove. Close the Modems Properties and the Control Panel.
- To delete the old driver, click on Start again go to programs, then select Windows Explorer. In Windows Explorer, open the Windows directory and look for the INF subdirectory. In the INF subdirectory there will be another subdirector named OTHER for OSR2. In there you will see several file. Highlight the file . MDMRSS, MicrosoftWave, or MirosoftWAVRSS and delete from your system.
- You can instal your new modem using the new drivers.
2.) Update Firmware using Flash Utility
YOU ARE NOW READY TO FLASH THE MODEM WITH THE NEW V.90 CODE. Using Flash Utility Disk for Windows 95. Run "Flashcom.exe" to start flashing to V.90 code.
For further information, please read "readme.txt" in the Flash Utility Disk
If you have any problems, please see Frequently Asked Questions.
Created by Harmony Multimedia